18 Gauge Steel Thickness and Weight
A 18 gauge carbon steel (MSG) sheet is 0.0478 in (1.214 mm) thick. At 7,850 kg/m³ (0.2836 lb/in³) it weighs 1.952 lb/ft² (9.53 kg/m²), so a 4×8 ft sheet weighs 62.5 lb (28.3 kg) and a 1250×2500 mm sheet weighs 29.8 kg (65.7 lb).
- Thickness
- 0.0478 in · 1.214 mm
- Weight per ft²
- 1.952 lb
- Weight per m²
- 9.53 kg
- 4×8 ft sheet
- 62.5 lb · 28.3 kg
- 1250×2500 mm sheet
- 29.8 kg · 65.7 lb
- Density used
- 7,850 kg/m³ · 0.2836 lb/in³
Sheet metal gauge & plate weight calculator
Thickness
0.0478 in
1.21 mm
Per ft²
1.952 lb
9.53 kg/m²
4 × 8 ft sheet
62.47 lb
28.33 kg
1250 × 2500 mm
29.78 kg
65.66 lb
- Gauge standard
- Manufacturers' Standard Gauge (MSG)
- Thickness
- 0.0478 in · 1.214 mm
- Nearest gauge
- 18 ga on the MSG chart
- Density
- 7,850 kg/m³ (0.2836 lb/in³)
- Weight per ft²
- 1.952 lb
- Weight per m²
- 9.53 kg
- 4 × 8 ft (48 × 96 in) sheet (32 ft²)
- 62.47 lb · 28.33 kg
- 1250 × 2500 mm sheet (3.125 m²)
- 65.66 lb · 29.78 kg
- Published MSG charts list 2.000 lb/ft² for 18 ga because they use 41.82 lb/ft² per inch. Density-based weight is 1.952 lb/ft² (40.84 lb/ft² per inch).
Worked calculation
- Look up the thickness. Manufacturers' Standard Gauge (MSG), 18 ga = 0.0478 in. In millimetres: 0.0478 × 25.4 = 1.214 mm.
- State the density. Carbon Steel: 7,850 kg/m³ = 0.2836 lb/in³ (1 lb/in³ = 27,679.9 kg/m³).
- Weight per square foot. 0.0478 in × 144 in²/ft² × 0.2836 lb/in³ ≈ 1.952 lb/ft².
- Weight per square metre. 1.214 mm × 7.85 kg/m²/mm (density ÷ 1,000) ≈ 9.53 kg/m².
- Weight of a 4×8 ft sheet. 1.952 lb/ft² × 32 ft² ≈ 62.5 lb (28.3 kg). For a 1250×2500 mm sheet: 9.53 kg/m² × 3.125 m² ≈ 29.8 kg.
- Compare with the published chart weight. MSG defines 18 ga as 2.000 lb/ft² nominal (0.0478 in × 41.82 lb/ft² per inch). The density-based 1.952 lb/ft² is 2.5% lower because 7,850 kg/m³ equals 40.84 lb/ft² per inch, not 41.82.
Reference tables
| Chart | Thickness (in) | Thickness (mm) | lb/ft² | kg/m² | 4×8 ft sheet (lb) |
|---|---|---|---|---|---|
| Manufacturers' Standard Gauge (MSG) | 0.0478 | 1.21 | 1.952 | 9.53 | 62.5 |
| Stainless Steel Gauge (U.S. Standard progression) | 0.0500 | 1.27 | 2.081 | 10.16 | 66.6 |
| Brown & Sharpe / American Wire Gauge (AWG) | 0.0403 | 1.02 | 0.566 | 2.76 | 18.1 |
| Galvanized Sheet Gauge | 0.0516 | 1.31 | 2.107 | 10.29 | 67.4 |
The same gauge number gives a different thickness in every chart.
| Gauge | Thickness (in) | Thickness (mm) | lb/ft² | kg/m² | 4×8 ft sheet (lb) |
|---|---|---|---|---|---|
| 16 ga | 0.0598 | 1.52 | 2.442 | 11.92 | 78.1 |
| 17 ga | 0.0538 | 1.37 | 2.197 | 10.73 | 70.3 |
| 18 ga | 0.0478 | 1.21 | 1.952 | 9.53 | 62.5 |
| 19 ga | 0.0418 | 1.06 | 1.707 | 8.33 | 54.6 |
| 20 ga | 0.0359 | 0.91 | 1.466 | 7.16 | 46.9 |
Engineering and fabrication notes
18 gauge steel (0.0478 in, 1.21 mm) has a convenient chart weight of exactly 2.000 lb/ft², so mental arithmetic for a 4×8 sheet gives 64.0 lb by the chart (62.5 lb by density). It is a common thickness for light enclosures, shelving, kitchen equipment panels and sheet metal ductwork. At this thickness large flat panels are thin enough to oil-can if they are unsupported, so designers add hems, flanges or stiffening ribs rather than moving up a gauge.
Adjacent sizes and comparisons
- 16 gauge steel Next thicker gauge page
- 20 gauge steel Next thinner gauge page
- 18 gauge stainless steel Same gauge number, different chart
- 18 gauge aluminum Same gauge number, different chart
- 18 gauge galvanized steel Same gauge number, different chart
- Sheet & plate weight calculator Any thickness, any size
- Why 16 gauge is not one thickness Reference guide
- All gauge pages Browse every gauge chart page
Frequently asked questions
What is the thickness of 18 gauge carbon steel (MSG)?
18 Gauge Steel is 0.0478 in or 1.21 mm on the Manufacturers' Standard Gauge (MSG) chart. Weight-defined: nominal lb/ft² ÷ 41.82 lb/ft² per inch.
How much does a 4×8 sheet of 18 gauge carbon steel (MSG) weigh?
A 4×8 ft (48 × 96 in) sheet of 18 gauge carbon steel (MSG) weighs about 62.5 lb (28.3 kg) using 7,850 kg/m³. That is 1.952 lb/ft² × 32 ft². Actual mill weight varies with thickness tolerance.
Is 18 gauge steel the same thickness as 18 gauge in other metals?
No. At 18 gauge the charts give 0.0478 in for carbon steel, 0.0500 in for stainless steel, 0.0403 in for aluminum and 0.0516 in for galvanized steel.
Why does a chart list 18 gauge steel as 2.000 lb/ft²?
Manufacturers' Standard Gauge was defined by weight: 18 ga is a nominal 2.000 lb/ft², and the thickness 0.0478 in is that weight divided by 41.82 lb/ft² per inch. True steel density gives 1.952 lb/ft², about 2.5% less.