Pipe Schedule & Weight Calculator
Choose a nominal pipe size and a schedule to get the exact outside diameter, wall thickness, inside diameter and plain-end weight in lb/ft and kg/m, and the total weight for the length you enter. Dimensions follow ASME B36.10M.
Pipe schedule & weight calculator
Outside diameter
2.375 in
60.3 mm
Wall
0.154 in
3.91 mm
Inside diameter
2.067 in
52.5 mm
Per foot
3.657 lb
5.442 kg/m
Total, 20 ft
73.14 lb
33.17 kg
Schedule
Sch 40
NPS 2
- Pipe
- NPS 2, Sch 40
- Material and density
- Carbon Steel, 7,850 kg/m³ (0.2836 lb/in³)
- Outside diameter (OD)
- 2.375 in · 60.3 mm
- Wall thickness
- 0.154 in · 3.91 mm
- Inside diameter (ID)
- 2.067 in · 52.5 mm
- Plain-end weight
- 3.657 lb/ft · 5.442 kg/m
- Total for 20 ft
- 73.14 lb · 33.17 kg
- At NPS 2, Sch 40 and STD are the same wall (0.154 in).
- Plain-end weight, without coupling or threads. ASTM A53 allows ±10% on delivered weight.
Where STD and XS overlap Sch 40 and Sch 80
- STD equals Sch 40 from NPS 1/8 through NPS 10. At NPS 12, STD is 0.375 in and Sch 40 is 0.406 in.
- XS equals Sch 80 from NPS 1/8 through NPS 8. At NPS 10 and 12, XS is 0.500 in, thinner than Sch 80.
- XXS is thicker than Sch 160 through NPS 6; from NPS 8 the order reverses.
Pipe schedule chart
| NPS | OD | Sch 10 | Sch 40 | Sch 80 | Sch 160 | STD | XS | XXS |
|---|---|---|---|---|---|---|---|---|
| 1/8" | 0.405 | 0.049 | 0.068 | 0.095 | — | 0.068 | 0.095 | — |
| 1/4" | 0.540 | 0.065 | 0.088 | 0.119 | — | 0.088 | 0.119 | — |
| 3/8" | 0.675 | 0.065 | 0.091 | 0.126 | — | 0.091 | 0.126 | — |
| 1/2" | 0.840 | 0.083 | 0.109 | 0.147 | 0.188 | 0.109 | 0.147 | 0.294 |
| 3/4" | 1.050 | 0.083 | 0.113 | 0.154 | 0.219 | 0.113 | 0.154 | 0.308 |
| 1" | 1.315 | 0.109 | 0.133 | 0.179 | 0.250 | 0.133 | 0.179 | 0.358 |
| 1 1/4" | 1.660 | 0.109 | 0.140 | 0.191 | 0.250 | 0.140 | 0.191 | 0.382 |
| 1 1/2" | 1.900 | 0.109 | 0.145 | 0.200 | 0.281 | 0.145 | 0.200 | 0.400 |
| 2" | 2.375 | 0.109 | 0.154 | 0.218 | 0.344 | 0.154 | 0.218 | 0.436 |
| 2 1/2" | 2.875 | 0.120 | 0.203 | 0.276 | 0.375 | 0.203 | 0.276 | 0.552 |
| 3" | 3.500 | 0.120 | 0.216 | 0.300 | 0.438 | 0.216 | 0.300 | 0.600 |
| 3 1/2" | 4.000 | 0.120 | 0.226 | 0.318 | — | 0.226 | 0.318 | 0.636 |
| 4" | 4.500 | 0.120 | 0.237 | 0.337 | 0.531 | 0.237 | 0.337 | 0.674 |
| 5" | 5.563 | 0.134 | 0.258 | 0.375 | 0.625 | 0.258 | 0.375 | 0.750 |
| 6" | 6.625 | 0.134 | 0.280 | 0.432 | 0.719 | 0.280 | 0.432 | 0.864 |
| 8" | 8.625 | 0.148 | 0.322 | 0.500 | 0.906 | 0.322 | 0.500 | 0.875 |
| 10" | 10.750 | 0.165 | 0.365 | 0.594 | 1.125 | 0.365 | 0.500 | 1.000 |
| 12" | 12.750 | 0.180 | 0.406 | 0.688 | 1.312 | 0.375 | 0.500 | 1.000 |
A dash means ASME B36.10M lists no wall for that size and schedule.
Pipe size pages
- 1 Inch Schedule 40 Pipe Dimensions and Weight 1.315 in · 33.4 mm
- 2 Inch Schedule 40 Pipe Dimensions and Weight 2.375 in · 60.3 mm
- 4 Inch Schedule 40 Pipe Dimensions and Weight 4.500 in · 114.3 mm
- 6 Inch Schedule 40 Pipe Dimensions and Weight 6.625 in · 168.3 mm
- 2 Inch Schedule 80 Pipe Dimensions and Weight 2.375 in · 60.3 mm
- 4 Inch Schedule 80 Pipe Dimensions and Weight 4.500 in · 114.3 mm
- Schedule 40 vs Schedule 80 pipe Wall, ID and weight side by side
Read why a 2 inch pipe has a 2.375 in OD in the guide to NPS, OD and schedule.
Frequently asked questions
Why is 2 inch pipe 2.375 inches across?
Nominal Pipe Size (NPS) is a label, not a measurement. For NPS 1/8 through 12 the outside diameter (OD) is larger than the NPS number, and the OD is fixed for every schedule of that size. NPS 2 has a 2.375 in (60.3 mm) OD. Only from NPS 14 upward does OD equal the NPS number.
What changes between Schedule 40 and Schedule 80?
The wall thickness changes; the outside diameter does not. A heavier schedule has a thicker wall and a smaller inside diameter, so it weighs more per foot. NPS 2 Sch 40 has a 0.154 in wall and a 2.067 in ID; Sch 80 has a 0.218 in wall and a 1.939 in ID.
Is STD the same as Schedule 40, and XS the same as Schedule 80?
STD (standard weight) equals Sch 40 from NPS 1/8 through NPS 10; at NPS 12, STD is 0.375 in and Sch 40 is 0.406 in. XS (extra strong) equals Sch 80 from NPS 1/8 through NPS 8; at NPS 10 and 12, XS is 0.500 in, thinner than Sch 80.
How is pipe weight calculated?
Plain-end weight is π × (OD − wall) × wall × density. For carbon steel in inches this simplifies to 10.69 × (OD − wall) × wall pounds per foot, or 0.02466 × (OD − wall) × wall kilograms per metre in millimetres. Published ASME tables can differ from the formula by about 0.1–0.3% because of rounding.
Does this calculator give pressure ratings?
No. It gives dimensions and theoretical plain-end weight only. Pressure ratings depend on material grade, temperature, joint type and the governing code, so use the applicable code and your engineer for pressure design.