4 Inch Schedule 40 Pipe Dimensions and Weight
NPS 4 Sch 40 pipe has a 4.500 in (114.3 mm) outside diameter, a 0.237 in (6.02 mm) wall and a 4.026 in (102.3 mm) inside diameter. Plain-end carbon steel weight is 10.80 lb/ft (16.07 kg/m), about 216 lb for a 20 ft length.
- Outside diameter
- 4.500 in · 114.3 mm
- Wall thickness
- 0.237 in · 6.02 mm
- Inside diameter
- 4.026 in · 102.3 mm
- Plain-end weight
- 10.80 lb/ft · 16.07 kg/m
- 20 ft length
- 216 lb · 98 kg
- Standard
- ASME B36.10M, carbon steel 7,850 kg/m³
Pipe schedule & weight calculator
Outside diameter
4.500 in
114.3 mm
Wall
0.237 in
6.02 mm
Inside diameter
4.026 in
102.3 mm
Per foot
10.802 lb
16.075 kg/m
Total, 20 ft
216.0 lb
97.99 kg
Schedule
Sch 40
NPS 4
- Pipe
- NPS 4, Sch 40
- Material and density
- Carbon Steel, 7,850 kg/m³ (0.2836 lb/in³)
- Outside diameter (OD)
- 4.500 in · 114.3 mm
- Wall thickness
- 0.237 in · 6.02 mm
- Inside diameter (ID)
- 4.026 in · 102.3 mm
- Plain-end weight
- 10.802 lb/ft · 16.075 kg/m
- Total for 20 ft
- 216.0 lb · 97.99 kg
- At NPS 4, Sch 40 and STD are the same wall (0.237 in).
- Plain-end weight, without coupling or threads. ASTM A53 allows ±10% on delivered weight.
Worked calculation
- Look up the outside diameter. NPS 4: OD = 4.500 in = 114.3 mm (ASME B36.10M; fixed for every schedule of this size).
- Look up the wall. Sch 40: wall = 0.237 in = 6.02 mm.
- Inside diameter. ID = OD − 2 × wall = 4.500 − 2 × 0.237 = 4.026 in (102.3 mm).
- Plain-end weight. Carbon steel, 7,850 kg/m³ (0.2836 lb/in³): lb/ft = 10.69 × (OD − wall) × wall = 10.69 × (4.500 − 0.237) × 0.237 ≈ 10.80 lb/ft.
- Metric weight. kg/m = 0.02466 × (114.30 − 6.02) × 6.02 ≈ 16.07 kg/m.
- Length of pipe. 20 ft joint: 10.80 × 20 ≈ 216 lb (98 kg).
Reference tables
| Schedule | Wall (in) | Wall (mm) | ID (in) | ID (mm) | lb/ft | kg/m |
|---|---|---|---|---|---|---|
| Sch 10 | 0.120 | 3.05 | 4.260 | 108.2 | 5.62 | 8.36 |
| Sch 40 | 0.237 | 6.02 | 4.026 | 102.3 | 10.80 | 16.07 |
| Sch 80 | 0.337 | 8.56 | 3.826 | 97.2 | 15.00 | 22.32 |
| Sch 160 | 0.531 | 13.49 | 3.438 | 87.3 | 22.53 | 33.53 |
| STD | 0.237 | 6.02 | 4.026 | 102.3 | 10.80 | 16.07 |
| XS | 0.337 | 8.56 | 3.826 | 97.2 | 15.00 | 22.32 |
| XXS | 0.674 | 17.12 | 3.152 | 80.1 | 27.57 | 41.03 |
At NPS 4, Sch 40 and STD are the same wall (0.237 in). A dash means B36.10M lists no such wall at this size.
| NPS | OD (in) | OD (mm) | Wall (in) | ID (in) | lb/ft | kg/m |
|---|---|---|---|---|---|---|
| 3 | 3.500 | 88.9 | 0.216 | 3.068 | 7.58 | 11.29 |
| 3 1/2 | 4.000 | 101.6 | 0.226 | 3.548 | 9.12 | 13.57 |
| 4 | 4.500 | 114.3 | 0.237 | 4.026 | 10.80 | 16.07 |
| 5 | 5.563 | 141.3 | 0.258 | 5.047 | 14.63 | 21.78 |
| 6 | 6.625 | 168.3 | 0.280 | 6.065 | 18.99 | 28.27 |
| Metal | Density (kg/m³) | lb/ft | kg/m | 20 ft length (lb) |
|---|---|---|---|---|
| Carbon steel | 7,850 | 10.80 | 16.07 | 216 |
| Stainless steel | 8,000 | 11.01 | 16.38 | 220 |
| Aluminum | 2,700 | 3.72 | 5.53 | 74 |
Dimensions are from ASME B36.10M. Stainless pipe is also made to ASME B36.19M with its own schedule names; check that standard for stainless-specific sizes.
Engineering and fabrication notes
NPS 4 Schedule 40 pipe is 4.500 in across with a 0.237 in wall, a 4.026 in bore and a plain-end weight of 10.80 lb/ft, so one 20 ft joint is about 216 lb and needs lifting equipment. It is used for bollards and posts (often concrete filled), structural columns and braces, and utility piping. For weight estimates, remember published tables run about 0.1% from the formula and that wall thickness is allowed to vary: ASTM A53 permits the wall to be as low as 87.5% of nominal and weight to vary by 10%, so mill-delivered weight can differ from the theoretical figure.
Adjacent sizes and comparisons
- 4 inch Schedule 80 pipe Same size, other schedule
- 1 inch Schedule 40 pipe Same schedule, other size
- 2 inch Schedule 40 pipe Same schedule, other size
- 6 inch Schedule 40 pipe Same schedule, other size
- Schedule 40 vs Schedule 80 pipe All sizes compared
- Pipe schedule & weight calculator Every NPS and schedule
- Pipe NPS vs OD vs schedule Reference guide
Frequently asked questions
What are the dimensions of 4 inch Schedule 40 pipe?
OD 4.500 in (114.3 mm), wall 0.237 in (6.02 mm), ID 4.026 in (102.3 mm), per ASME B36.10M.
How much does 4 inch Schedule 40 pipe weigh per foot?
10.80 lb/ft (16.07 kg/m) plain-end in carbon steel, from 10.69 × (OD − wall) × wall. A 20 ft length weighs about 216 lb. Published tables differ by about 0.1–0.3%.
Why is 4 inch Sch 40 pipe not 4 inches across?
NPS is a nominal label. For NPS 1/8 through 12 the OD is larger than the NPS number; NPS 4 pipe is 4.500 in across in every schedule, and only the wall changes. The Sch 40 wall of 0.237 in leaves a bore of 4.026 in.
Is Sch 40 the same as STD at NPS 4?
At NPS 4, Sch 40 and STD are the same wall (0.237 in).