16 Gauge Steel Thickness and Weight
A 16 gauge carbon steel (MSG) sheet is 0.0598 in (1.519 mm) thick. At 7,850 kg/m³ (0.2836 lb/in³) it weighs 2.442 lb/ft² (11.92 kg/m²), so a 4×8 ft sheet weighs 78.1 lb (35.4 kg) and a 1250×2500 mm sheet weighs 37.3 kg (82.1 lb).
- Thickness
- 0.0598 in · 1.519 mm
- Weight per ft²
- 2.442 lb
- Weight per m²
- 11.92 kg
- 4×8 ft sheet
- 78.1 lb · 35.4 kg
- 1250×2500 mm sheet
- 37.3 kg · 82.1 lb
- Density used
- 7,850 kg/m³ · 0.2836 lb/in³
Sheet metal gauge & plate weight calculator
Thickness
0.0598 in
1.52 mm
Per ft²
2.442 lb
11.92 kg/m²
4 × 8 ft sheet
78.15 lb
35.45 kg
1250 × 2500 mm
37.26 kg
82.15 lb
- Gauge standard
- Manufacturers' Standard Gauge (MSG)
- Thickness
- 0.0598 in · 1.519 mm
- Nearest gauge
- 16 ga on the MSG chart
- Density
- 7,850 kg/m³ (0.2836 lb/in³)
- Weight per ft²
- 2.442 lb
- Weight per m²
- 11.92 kg
- 4 × 8 ft (48 × 96 in) sheet (32 ft²)
- 78.15 lb · 35.45 kg
- 1250 × 2500 mm sheet (3.125 m²)
- 82.15 lb · 37.26 kg
- Published MSG charts list 2.500 lb/ft² for 16 ga because they use 41.82 lb/ft² per inch. Density-based weight is 2.442 lb/ft² (40.84 lb/ft² per inch).
Worked calculation
- Look up the thickness. Manufacturers' Standard Gauge (MSG), 16 ga = 0.0598 in. In millimetres: 0.0598 × 25.4 = 1.519 mm.
- State the density. Carbon Steel: 7,850 kg/m³ = 0.2836 lb/in³ (1 lb/in³ = 27,679.9 kg/m³).
- Weight per square foot. 0.0598 in × 144 in²/ft² × 0.2836 lb/in³ ≈ 2.442 lb/ft².
- Weight per square metre. 1.519 mm × 7.85 kg/m²/mm (density ÷ 1,000) ≈ 11.92 kg/m².
- Weight of a 4×8 ft sheet. 2.442 lb/ft² × 32 ft² ≈ 78.1 lb (35.4 kg). For a 1250×2500 mm sheet: 11.92 kg/m² × 3.125 m² ≈ 37.3 kg.
- Compare with the published chart weight. MSG defines 16 ga as 2.500 lb/ft² nominal (0.0598 in × 41.82 lb/ft² per inch). The density-based 2.442 lb/ft² is 2.4% lower because 7,850 kg/m³ equals 40.84 lb/ft² per inch, not 41.82.
Reference tables
| Chart | Thickness (in) | Thickness (mm) | lb/ft² | kg/m² | 4×8 ft sheet (lb) |
|---|---|---|---|---|---|
| Manufacturers' Standard Gauge (MSG) | 0.0598 | 1.52 | 2.442 | 11.92 | 78.1 |
| Stainless Steel Gauge (U.S. Standard progression) | 0.0625 | 1.59 | 2.601 | 12.70 | 83.2 |
| Brown & Sharpe / American Wire Gauge (AWG) | 0.0508 | 1.29 | 0.714 | 3.48 | 22.8 |
| Galvanized Sheet Gauge | 0.0635 | 1.61 | 2.593 | 12.66 | 83.0 |
The same gauge number gives a different thickness in every chart.
| Gauge | Thickness (in) | Thickness (mm) | lb/ft² | kg/m² | 4×8 ft sheet (lb) |
|---|---|---|---|---|---|
| 14 ga | 0.0747 | 1.90 | 3.051 | 14.89 | 97.6 |
| 15 ga | 0.0673 | 1.71 | 2.748 | 13.42 | 87.9 |
| 16 ga | 0.0598 | 1.52 | 2.442 | 11.92 | 78.1 |
| 17 ga | 0.0538 | 1.37 | 2.197 | 10.73 | 70.3 |
| 18 ga | 0.0478 | 1.21 | 1.952 | 9.53 | 62.5 |
Engineering and fabrication notes
16 gauge steel is 0.0598 in (1.52 mm), close to but not equal to 1/16 in (0.0625 in). Stainless 16 gauge is exactly 1/16 in, which makes 16 gauge the most common place for a steel versus stainless mix-up on an order: the stainless sheet is about 4.5% thicker and, because stainless is denser, about 6.5% heavier. Carbon steel 16 gauge is a common choice for cabinets, equipment enclosures, light brackets and appliance panels, where it adds rigidity over 18 gauge for little extra weight (2.442 lb/ft² by density, 2.500 lb/ft² by the chart).
Adjacent sizes and comparisons
- 14 gauge steel Next thicker gauge page
- 18 gauge steel Next thinner gauge page
- 16 gauge stainless steel Same gauge number, different chart
- 16 gauge aluminum Same gauge number, different chart
- 16 gauge galvanized steel Same gauge number, different chart
- 16 gauge steel vs 16 gauge stainless Side-by-side comparison
- Sheet & plate weight calculator Any thickness, any size
- Why 16 gauge is not one thickness Reference guide
- All gauge pages Browse every gauge chart page
Frequently asked questions
What is the thickness of 16 gauge carbon steel (MSG)?
16 Gauge Steel is 0.0598 in or 1.52 mm on the Manufacturers' Standard Gauge (MSG) chart. Weight-defined: nominal lb/ft² ÷ 41.82 lb/ft² per inch.
How much does a 4×8 sheet of 16 gauge carbon steel (MSG) weigh?
A 4×8 ft (48 × 96 in) sheet of 16 gauge carbon steel (MSG) weighs about 78.1 lb (35.4 kg) using 7,850 kg/m³. That is 2.442 lb/ft² × 32 ft². Actual mill weight varies with thickness tolerance.
Is 16 gauge steel the same thickness as 16 gauge in other metals?
No. At 16 gauge the charts give 0.0598 in for carbon steel, 0.0625 in for stainless steel, 0.0508 in for aluminum and 0.0635 in for galvanized steel.
Why does a chart list 16 gauge steel as 2.500 lb/ft²?
Manufacturers' Standard Gauge was defined by weight: 16 ga is a nominal 2.500 lb/ft², and the thickness 0.0598 in is that weight divided by 41.82 lb/ft² per inch. True steel density gives 2.442 lb/ft², about 2.4% less.