Skip to content
StockGauge Metal gauge · plate · bar · pipe

16 Gauge Steel vs 16 Gauge Stainless Steel

16 Gauge Steel is 0.0598 in (1.52 mm) and weighs 2.442 lb/ft². 16 Gauge Stainless Steel is 0.0625 in (1.59 mm) and weighs 2.601 lb/ft². The stainless steel sheet is 4.5% thicker and weighs 106.5% as much per square foot; a 4×8 ft sheet is 83.2 lb against 78.1 lb.

16 Gauge Steel
0.0598 in · 2.442 lb/ft²
16 Gauge Stainless Steel
0.0625 in · 2.601 lb/ft²
Weight ratio
106.5% (stainless steel ÷ steel)
Equal-weight thickness
0.0587 in

Sheet metal gauge & plate weight calculator

Mode

Manufacturers' Standard Gauge (MSG). Weight-defined: nominal lb/ft² ÷ 41.82 lb/ft² per inch. Density 7,850 kg/m³ = 0.2836 lb/in³. Common handbook value for carbon and low-alloy steel (ASTM A36 design density).

Thickness

0.0598 in

1.52 mm

Per ft²

2.442 lb

11.92 kg/m²

4 × 8 ft sheet

78.15 lb

35.45 kg

1250 × 2500 mm

37.26 kg

82.15 lb

Gauge standard
Manufacturers' Standard Gauge (MSG)
Thickness
0.0598 in · 1.519 mm
Nearest gauge
16 ga on the MSG chart
Density
7,850 kg/m³ (0.2836 lb/in³)
Weight per ft²
2.442 lb
Weight per m²
11.92 kg
4 × 8 ft (48 × 96 in) sheet (32 ft²)
78.15 lb · 35.45 kg
1250 × 2500 mm sheet (3.125 m²)
82.15 lb · 37.26 kg
  • Published MSG charts list 2.500 lb/ft² for 16 ga because they use 41.82 lb/ft² per inch. Density-based weight is 2.442 lb/ft² (40.84 lb/ft² per inch).

Worked calculation

  1. 16 Gauge Steel thickness. Manufacturers' Standard Gauge (MSG): 16 ga = 0.0598 in = 1.52 mm.
  2. 16 Gauge Stainless Steel thickness. Stainless Steel Gauge (U.S. Standard progression): 16 ga = 0.0625 in = 1.59 mm.
  3. Weight per square foot. 16 Gauge Steel (7,850 kg/m³ = 0.2836 lb/in³): 0.0598 × 144 × 0.2836 ≈ 2.442 lb/ft². 16 Gauge Stainless Steel (8,000 kg/m³ = 0.2890 lb/in³): 0.0625 × 144 × 0.2890 ≈ 2.601 lb/ft².
  4. Ratio. 2.601 ÷ 2.442 ≈ 1.065, so stainless steel weighs 106.5% of the steel sheet per square foot.
  5. Equal-weight thickness. To weigh the same as 16 gauge steel, stainless steel would be 0.0598 × 7,850 ÷ 8,000 ≈ 0.0587 in (1.49 mm) thick.

Reference tables

16 Gauge Steel vs 16 Gauge Stainless Steel
Property16 Gauge Steel16 Gauge Stainless SteelStainless Steel vs steel
Gauge standard Manufacturers' Standard Gauge (MSG)Stainless Steel Gauge (U.S. Standard progression)—
Thickness (in) 0.05980.0625+4.5%
Thickness (mm) 1.521.59+4.5%
Density (kg/m³) 7,8508,000+1.9%
Weight (lb/ft²) 2.4422.601+6.5%
Weight (kg/m²) 11.9212.70+6.5%
4×8 ft sheet (lb) 78.183.2+6.5%
1250×2500 mm sheet (kg) 37.339.7+6.5%

Theoretical weights from chart thickness and handbook density.

Neighbouring gauges: steel vs stainless steel
GaugeMSG (in)Stainless (in)MSG lb/ft²Stainless lb/ft²
14 ga 0.07470.07813.0513.250
15 ga 0.06730.07032.7482.926
16 ga 0.05980.06252.4422.601
17 ga 0.05380.05632.1972.343
18 ga 0.04780.05001.9522.081

Engineering and fabrication notes

16 gauge carbon steel (0.0598 in), 16 gauge stainless (0.0625 in) and 16 gauge galvanized (0.0635 in) are three different thicknesses under one number, and the stainless sheet is both 4.5% thicker and 6.5% heavier per square foot than the steel one. To avoid ordering mistakes, state the metal, the decimal thickness and the product standard, for example ASTM A1008 for cold-rolled steel sheet or A240 for stainless sheet and plate, instead of relying on the gauge number. Stainless is the same 1/16 in you would expect from the fraction; carbon steel is 0.0027 in under it.

Frequently asked questions

Is 16 gauge steel thicker than 16 gauge stainless steel?

16 Gauge Stainless Steel is 0.0625 in and 16 gauge steel is 0.0598 in, so the stainless steel sheet is 4.5% thicker. They follow different charts: Manufacturers' Standard Gauge (MSG) and Stainless Steel Gauge (U.S. Standard progression).

How much heavier is steel than stainless steel at 16 gauge?

A 4×8 ft sheet of 16 gauge steel weighs about 78.1 lb and 16 gauge stainless steel about 83.2 lb, using 7,850 and 8,000 kg/m³. The stainless steel sheet weighs 106.5% of the other per square foot.

What thickness of stainless steel weighs the same as 16 gauge steel?

Stainless Steel would need to be about 0.0587 in (1.49 mm) thick to match the weight per square foot of 16 gauge steel, because the density ratio is 7,850 : 8,000.