16 Gauge Steel vs 16 Gauge Aluminum
16 Gauge Steel is 0.0598 in (1.52 mm) and weighs 2.442 lb/ft². 16 Gauge Aluminum is 0.0508 in (1.29 mm) and weighs 0.714 lb/ft². The aluminum sheet is 15.1% thinner and weighs 29.2% as much per square foot; a 4×8 ft sheet is 22.8 lb against 78.1 lb.
- 16 Gauge Steel
- 0.0598 in · 2.442 lb/ft²
- 16 Gauge Aluminum
- 0.0508 in · 0.714 lb/ft²
- Weight ratio
- 29.2% (aluminum ÷ steel)
- Equal-weight thickness
- 0.1739 in
Sheet metal gauge & plate weight calculator
Thickness
0.0598 in
1.52 mm
Per ft²
2.442 lb
11.92 kg/m²
4 × 8 ft sheet
78.15 lb
35.45 kg
1250 × 2500 mm
37.26 kg
82.15 lb
- Gauge standard
- Manufacturers' Standard Gauge (MSG)
- Thickness
- 0.0598 in · 1.519 mm
- Nearest gauge
- 16 ga on the MSG chart
- Density
- 7,850 kg/m³ (0.2836 lb/in³)
- Weight per ft²
- 2.442 lb
- Weight per m²
- 11.92 kg
- 4 × 8 ft (48 × 96 in) sheet (32 ft²)
- 78.15 lb · 35.45 kg
- 1250 × 2500 mm sheet (3.125 m²)
- 82.15 lb · 37.26 kg
- Published MSG charts list 2.500 lb/ft² for 16 ga because they use 41.82 lb/ft² per inch. Density-based weight is 2.442 lb/ft² (40.84 lb/ft² per inch).
Worked calculation
- 16 Gauge Steel thickness. Manufacturers' Standard Gauge (MSG): 16 ga = 0.0598 in = 1.52 mm.
- 16 Gauge Aluminum thickness. Brown & Sharpe / American Wire Gauge (AWG): 16 ga = 0.0508 in = 1.29 mm.
- Weight per square foot. 16 Gauge Steel (7,850 kg/m³ = 0.2836 lb/in³): 0.0598 × 144 × 0.2836 ≈ 2.442 lb/ft². 16 Gauge Aluminum (2,700 kg/m³ = 0.0975 lb/in³): 0.0508 × 144 × 0.0975 ≈ 0.714 lb/ft².
- Ratio. 0.714 ÷ 2.442 ≈ 0.292, so aluminum weighs 29.2% of the steel sheet per square foot.
- Equal-weight thickness. To weigh the same as 16 gauge steel, aluminum would be 0.0598 × 7,850 ÷ 2,700 ≈ 0.1739 in (4.42 mm) thick.
Reference tables
| Property | 16 Gauge Steel | 16 Gauge Aluminum | Aluminum vs steel |
|---|---|---|---|
| Gauge standard | Manufacturers' Standard Gauge (MSG) | Brown & Sharpe / American Wire Gauge (AWG) | — |
| Thickness (in) | 0.0598 | 0.0508 | -15.1% |
| Thickness (mm) | 1.52 | 1.29 | -15.1% |
| Density (kg/m³) | 7,850 | 2,700 | -65.6% |
| Weight (lb/ft²) | 2.442 | 0.714 | -70.8% |
| Weight (kg/m²) | 11.92 | 3.48 | -70.8% |
| 4×8 ft sheet (lb) | 78.1 | 22.8 | -70.8% |
| 1250×2500 mm sheet (kg) | 37.3 | 10.9 | -70.8% |
Theoretical weights from chart thickness and handbook density.
| Gauge | MSG (in) | B&S / AWG (in) | MSG lb/ft² | B&S / AWG lb/ft² |
|---|---|---|---|---|
| 14 ga | 0.0747 | 0.0641 | 3.051 | 0.900 |
| 15 ga | 0.0673 | 0.0571 | 2.748 | 0.802 |
| 16 ga | 0.0598 | 0.0508 | 2.442 | 0.714 |
| 17 ga | 0.0538 | 0.0453 | 2.197 | 0.636 |
| 18 ga | 0.0478 | 0.0403 | 1.952 | 0.566 |
Engineering and fabrication notes
At 16 gauge the aluminum sheet (0.0508 in) is 15.1% thinner than the steel sheet (0.0598 in) and weighs 29.2% as much per square foot. Weight is only part of the trade. Aluminum expands roughly twice as much as steel with temperature (about 23 against 12 µm per metre per kelvin), so long assemblies that mix the two need slotted fasteners or expansion allowance. Welding also differs: aluminum needs its own process settings and filler, while steel can be welded with common MIG or spot equipment. Suppliers stock aluminum as 0.050 in sheet rather than by gauge, so write the decimal thickness and alloy on the order.
Adjacent sizes and comparisons
- 16 Gauge Steel Full page and calculator
- 16 Gauge Aluminum Full page and calculator
- 14 gauge steel vs 14 gauge aluminum Another comparison
- 16 gauge steel vs 16 gauge stainless Another comparison
- Sheet & plate weight calculator Any thickness, any size
- Why 16 gauge is not one thickness Reference guide
- All comparisons Browse every comparison page
Frequently asked questions
Is 16 gauge steel thicker than 16 gauge aluminum?
16 Gauge Aluminum is 0.0508 in and 16 gauge steel is 0.0598 in, so the aluminum sheet is 15.1% thinner. They follow different charts: Manufacturers' Standard Gauge (MSG) and Brown & Sharpe / American Wire Gauge (AWG).
How much heavier is steel than aluminum at 16 gauge?
A 4×8 ft sheet of 16 gauge steel weighs about 78.1 lb and 16 gauge aluminum about 22.8 lb, using 7,850 and 2,700 kg/m³. The aluminum sheet weighs 29.2% of the other per square foot.
What thickness of aluminum weighs the same as 16 gauge steel?
Aluminum would need to be about 0.1739 in (4.42 mm) thick to match the weight per square foot of 16 gauge steel, because the density ratio is 7,850 : 2,700.