Skip to content
StockGauge Metal gauge · plate · bar · pipe

18 Gauge Aluminum Thickness and Weight

A 18 gauge aluminum (Brown & Sharpe) sheet is 0.0403 in (1.024 mm) thick. At 2,700 kg/m³ (0.0975 lb/in³) it weighs 0.566 lb/ft² (2.76 kg/m²), so a 4×8 ft sheet weighs 18.1 lb (8.2 kg) and a 1250×2500 mm sheet weighs 8.6 kg (19.0 lb).

Thickness
0.0403 in · 1.024 mm
Weight per ft²
0.566 lb
Weight per m²
2.76 kg
4×8 ft sheet
18.1 lb · 8.2 kg
1250×2500 mm sheet
8.6 kg · 19.0 lb
Density used
2,700 kg/m³ · 0.0975 lb/in³

Sheet metal gauge & plate weight calculator

Mode

Brown & Sharpe / American Wire Gauge (AWG). Geometric: d(n) = 0.005 × 92^((36 − n) / 39) in. Density 2,700 kg/m³ = 0.0975 lb/in³. 6061 is about 2,700 kg/m³; 5052 is listed slightly lower (about 2,680) by some sources, a 0.7% difference.

Thickness

0.0403 in

1.02 mm

Per ft²

0.566 lb

2.76 kg/m²

4 × 8 ft sheet

18.11 lb

8.216 kg

1250 × 2500 mm

8.637 kg

19.04 lb

Gauge standard
Brown & Sharpe / American Wire Gauge (AWG)
Thickness
0.0403 in · 1.024 mm
Nearest gauge
18 ga on the B&S / AWG chart
Density
2,700 kg/m³ (0.0975 lb/in³)
Weight per ft²
0.566 lb
Weight per m²
2.76 kg
4 × 8 ft (48 × 96 in) sheet (32 ft²)
18.11 lb · 8.216 kg
1250 × 2500 mm sheet (3.125 m²)
19.04 lb · 8.637 kg

Worked calculation

  1. Look up the thickness. Brown & Sharpe / American Wire Gauge (AWG), 18 ga = 0.0403 in. In millimetres: 0.0403 × 25.4 = 1.024 mm.
  2. State the density. Aluminum 6061 / 5052: 2,700 kg/m³ = 0.0975 lb/in³ (1 lb/in³ = 27,679.9 kg/m³).
  3. Weight per square foot. 0.0403 in × 144 in²/ft² × 0.0975 lb/in³ ≈ 0.566 lb/ft².
  4. Weight per square metre. 1.024 mm × 2.70 kg/m²/mm (density ÷ 1,000) ≈ 2.76 kg/m².
  5. Weight of a 4×8 ft sheet. 0.566 lb/ft² × 32 ft² ≈ 18.1 lb (8.2 kg). For a 1250×2500 mm sheet: 2.76 kg/m² × 3.125 m² ≈ 8.6 kg.
  6. Compare with the published chart weight. MSG defines 18 ga as 2.000 lb/ft² nominal (0.0403 in × 41.82 lb/ft² per inch). The density-based 0.566 lb/ft² is 253.3% lower because 7,850 kg/m³ equals 40.84 lb/ft² per inch, not 41.82.

Reference tables

18 gauge in each chart (density-based weights)
ChartThickness (in)Thickness (mm)lb/ft²kg/m²4×8 ft sheet (lb)
Manufacturers' Standard Gauge (MSG) 0.04781.211.9529.5362.5
Stainless Steel Gauge (U.S. Standard progression) 0.05001.272.08110.1666.6
Brown & Sharpe / American Wire Gauge (AWG) 0.04031.020.5662.7618.1
Galvanized Sheet Gauge 0.05161.312.10710.2967.4

The same gauge number gives a different thickness in every chart.

B&S / AWG gauges around 18 ga
GaugeThickness (in)Thickness (mm)lb/ft²kg/m²4×8 ft sheet (lb)
16 ga 0.05081.290.7143.4822.8
17 ga 0.04531.150.6363.1120.4
18 ga 0.04031.020.5662.7618.1
19 ga 0.03590.910.5042.4616.1
20 ga 0.03200.810.4492.1914.4

Engineering and fabrication notes

18 gauge aluminum is 0.0403 in (1.02 mm), essentially the 0.040 in stock thickness, and the thin end of what this site charts. It suits light trim, covers, reflectors, nameplates and parts formed by hand. It weighs 0.566 lb/ft², so a 4×8 sheet is only about 18.1 lb. Sheet this thin dents easily, so temper matters: soft grades bend without cracking while harder tempers hold their shape, and the alloy and temper should be written on the order alongside the thickness.

Frequently asked questions

What is the thickness of 18 gauge aluminum (Brown & Sharpe)?

18 Gauge Aluminum is 0.0403 in or 1.02 mm on the Brown & Sharpe / American Wire Gauge (AWG) chart. Geometric: d(n) = 0.005 × 92^((36 − n) / 39) in.

How much does a 4×8 sheet of 18 gauge aluminum (Brown & Sharpe) weigh?

A 4×8 ft (48 × 96 in) sheet of 18 gauge aluminum (Brown & Sharpe) weighs about 18.1 lb (8.2 kg) using 2,700 kg/m³. That is 0.566 lb/ft² × 32 ft². Actual mill weight varies with thickness tolerance.

Is 18 gauge aluminum the same thickness as 18 gauge in other metals?

No. At 18 gauge the charts give 0.0478 in for carbon steel, 0.0500 in for stainless steel, 0.0403 in for aluminum and 0.0516 in for galvanized steel.

What decimal thickness is closest to 18 gauge aluminum?

Aluminum gauge follows Brown & Sharpe / AWG: thickness = 0.005 × 92^((36 − 18) ÷ 39) = 0.0403 in. Of the round decimal thicknesses suppliers commonly stock (0.040, 0.050, 0.063, 0.080 and 0.100 in), 0.040 in is nearest, 0.7% thinner than the gauge value. Order by decimal thickness and alloy rather than by gauge number.