Skip to content
StockGauge Metal gauge · plate · bar · pipe

4×8 Steel Sheet Weight Chart

A 4×8 ft (32 ft²) carbon steel sheet weighs 78.1 lb in 16 gauge, 97.6 lb in 14 gauge, 176 lb in 10 gauge and 327 lb in 1/4 in plate, using 7,850 kg/m³. Chart weights run about 2.4% higher.

16 gauge
78.1 lb · 35.4 kg
14 gauge
97.6 lb · 44.3 kg
10 gauge
176 lb · 79.7 kg
1/4 in plate
327 lb
Sheet area
32 ft² · 2.973 m²

Sheet metal gauge & plate weight calculator

Mode

Manufacturers' Standard Gauge (MSG). Weight-defined: nominal lb/ft² ÷ 41.82 lb/ft² per inch. Density 7,850 kg/m³ = 0.2836 lb/in³. Common handbook value for carbon and low-alloy steel (ASTM A36 design density).

Thickness

0.0747 in

1.90 mm

Per ft²

3.051 lb

14.89 kg/m²

4 × 8 ft sheet

97.62 lb

44.28 kg

1250 × 2500 mm

46.55 kg

102.6 lb

Gauge standard
Manufacturers' Standard Gauge (MSG)
Thickness
0.0747 in · 1.897 mm
Nearest gauge
14 ga on the MSG chart
Density
7,850 kg/m³ (0.2836 lb/in³)
Weight per ft²
3.051 lb
Weight per m²
14.89 kg
4 × 8 ft (48 × 96 in) sheet (32 ft²)
97.62 lb · 44.28 kg
1250 × 2500 mm sheet (3.125 m²)
102.6 lb · 46.55 kg
  • Published MSG charts list 3.125 lb/ft² for 14 ga because they use 41.82 lb/ft² per inch. Density-based weight is 3.051 lb/ft² (40.84 lb/ft² per inch).

Worked calculation

  1. Area of a 4×8 ft sheet. 4 ft × 8 ft = 32 ft² (48 × 96 in = 4,608 in²; 1.2192 m × 2.4384 m = 2.973 m²).
  2. Weight per square foot. thickness (in) × 144 × 0.2836 lb/in³. 14 ga: 0.0747 × 144 × 0.2836 ≈ 3.051 lb/ft².
  3. Multiply by 32. 3.051 lb/ft² × 32 ft² ≈ 97.6 lb (44.3 kg) for one 14 gauge sheet.
  4. Plate works the same way. 1/4 in: 0.25 × 144 × 0.2836 = 10.21 lb/ft², × 32 ≈ 327 lb. Rule of thumb: 40.84 lb/ft² per inch of thickness.
  5. Chart nominal vs density weight. MSG chart weights use 41.82 lb/ft² per inch, about 2.4% above the 40.84 from 7,850 kg/m³. Use the chart value to match a published chart and the density value to estimate real steel.

Reference tables

Carbon steel (MSG) 4×8 ft sheet weight by gauge
GaugeThickness (in)Thickness (mm)lb/ft²4×8 ft (lb)4×8 ft (kg)Chart nominal 4×8 (lb)
7 ga 0.17934.557.322234106240
8 ga 0.16444.186.71421597.5220
9 ga 0.14953.806.10519588.6200
10 ga 0.13453.425.49317679.7180
11 ga 0.11963.044.88415670.9160
12 ga 0.10462.664.27213762.0140
13 ga 0.08972.283.66311753.2120
14 ga 0.07471.903.05197.644.3100
15 ga 0.06731.712.74887.939.990.0
16 ga 0.05981.522.44278.135.480.0
17 ga 0.05381.372.19770.331.972.0
18 ga 0.04781.211.95262.528.364.0
19 ga 0.04181.061.70754.624.856.0
20 ga 0.03590.911.46646.921.348.0
21 ga 0.03290.841.34443.019.544.0
22 ga 0.02990.761.22139.117.740.0
23 ga 0.02690.681.09935.215.936.0
24 ga 0.02390.610.97631.214.232.0
25 ga 0.02090.530.85427.312.428.0
26 ga 0.01790.450.73123.410.624.0
27 ga 0.01640.420.67021.49.722.0
28 ga 0.01490.380.60819.58.820.0
29 ga 0.01350.340.55117.68.018.0
30 ga 0.01200.300.49015.77.116.0

Density-based weight uses 7,850 kg/m³. The nominal column is the published MSG chart weight (gauge nominal lb/ft² × 32).

Carbon steel plate 4×8 ft weight by thickness
Thicknessmmlb/ft²4×8 ft (lb)4×8 ft (kg)
3/16 in 4.767.66245111
1/4 in 6.3510.21327148
5/16 in 7.9412.76408185
3/8 in 9.5215.31490222
1/2 in 12.7020.42653296
5/8 in 15.8825.52817370
3/4 in 19.0530.63980445
1 in 25.4040.841,307593
4×8 ft sheet weight in four gauge charts (lb)
GaugeCarbon steel (MSG)StainlessAluminum (B&S)Galvanized
10 ga 17618745.8181
12 ga 13714636.3142
14 ga 97.610428.8103
16 ga 78.183.222.883.0
18 ga 62.566.618.167.4
20 ga 46.949.914.451.8

Same gauge number, different thickness and density in each metal.

Engineering and fabrication notes

A 4×8 ft sheet is 32 ft² (2.97 m²), so its weight is 32 times the weight per square foot at any thickness, which makes a chart easy to build and easy to check by hand. This chart covers every Manufacturers' Standard Gauge from 7 to 30 plus common plate thicknesses, and shows both the density-based weight and the nominal chart weight, which runs about 2.4% higher. It is useful for freight and pallet planning: for example 14 gauge (97.6 lb per sheet) at 40 sheets is about 3,905 lb before packaging. Metric sheets of 1250 × 2500 mm are 3.125 m², about 5% larger than 4×8.

Frequently asked questions

How much does a 4×8 sheet of 16 gauge steel weigh?

A 4×8 ft sheet of 16 gauge carbon steel weighs about 78.1 lb (35.4 kg) by density. The published MSG chart weight is 80 lb (2.5 lb/ft² × 32 ft²).

How much does a 4×8 sheet of 14 gauge steel weigh?

About 97.6 lb (44.3 kg) by density, or 100 lb by the nominal chart weight of 3.125 lb/ft².

How does a 4×8 sheet of 1/4 inch plate compare with 16 gauge sheet?

A 1/4 inch plate sheet weighs about 327 lb (148 kg): 10.21 lb/ft² × 32 ft². That is 4.2 times a 16 gauge sheet.

How do I convert a 4×8 sheet weight to a metric 1250×2500 mm sheet?

Multiply by 3.125 ÷ 2.973 ≈ 1.051. The 1250×2500 mm sheet has 3.125 m² against 2.973 m² for 4×8 ft, so it is about 5% larger and weighs about 5% more at the same thickness.