Skip to content
StockGauge Metal gauge · plate · bar · pipe

1/4 Inch Steel Plate Weight

1/4 inch (6.35 mm) carbon steel plate weighs 10.21 lb per square foot (49.85 kg/m²). A 4×8 ft plate weighs 327 lb (148 kg) and a 1250×2500 mm plate weighs 156 kg, using 7,850 kg/m³ (0.2836 lb/in³).

Thickness
0.2500 in · 6.35 mm
Weight per ft²
10.21 lb
Weight per m²
49.85 kg
4×8 ft plate
327 lb · 148 kg
1250×2500 mm plate
156 kg · 343 lb
Density used
7,850 kg/m³ · 0.2836 lb/in³

Sheet metal gauge & plate weight calculator

Mode

Manufacturers' Standard Gauge (MSG). Weight-defined: nominal lb/ft² ÷ 41.82 lb/ft² per inch. Density 7,850 kg/m³ = 0.2836 lb/in³. Common handbook value for carbon and low-alloy steel (ASTM A36 design density).

Length, width and thickness use the same unit. Fractions such as 1/4 are accepted.

One piece

326.7 lb

148.2 kg

Total × 1

326.7 lb

148.2 kg

Area per piece

32.000 ft²

2.9729 m²

Thickness

0.2500 in

6.35 mm

Piece (L × W × T)
96 × 48 × 0.25 in
Thickness
0.2500 in · 6.350 mm
Nearest gauge
Thicker than 7 ga (0.1793 in): plate, ordered by thickness
Density
7,850 kg/m³ (0.2836 lb/in³)
Area per piece
32.000 ft² · 2.9729 m²
One piece
326.7 lb · 148.2 kg
Total for 1 piece
326.7 lb · 148.2 kg

Worked calculation

  1. Convert the thickness. 1/4 in = 0.2500 in = 6.35 mm.
  2. State the density. Carbon steel: 7,850 kg/m³ = 0.2836 lb/in³ (ASTM A36 design density).
  3. Weight per square foot. 0.2500 in × 144 in²/ft² × 0.2836 lb/in³ ≈ 10.21 lb/ft². Shortcut: thickness × 40.84 lb/ft² per inch.
  4. Weight per square metre. 6.35 mm × 7.85 kg/m²/mm ≈ 49.85 kg/m².
  5. Weight of a 4×8 ft plate. 10.21 lb/ft² × 32 ft² ≈ 327 lb (148 kg).
  6. Weight of any cut piece. lb = length (in) × width (in) × 0.2500 × 0.2836. A 24 × 24 in blank: 24 × 24 × 0.2500 × 0.2836 ≈ 40.8 lb.

Reference tables

1/4 in plate or sheet in five metals
MetalDensity (kg/m³)lb/ft²kg/m²4×8 ft (lb)1250×2500 mm (kg)
Carbon steel 7,85010.2149.85327156
Stainless steel 8,00010.4050.80333159
Aluminum 2,7003.5117.1511253.6
Brass C360 8,50011.0553.98354169
Copper C110 8,94011.6356.77372177

Theoretical weights from nominal thickness and handbook density. Mill and supplier tolerances apply.

1/4 inch carbon steel plate: weight by piece size
Piece sizeft²lbkg
12 × 12 in (1 ft²) 1.010.24.6
24 × 24 in 4.040.818.5
24 × 48 in 8.081.737.0
48 × 96 in (4×8 ft) 32.0327148
48 × 120 in (4×10 ft) 40.0408185
60 × 120 in (5×10 ft) 50.0510232
1250 × 2500 mm 33.6343156
Carbon steel plate weight by thickness
Thicknessmmlb/ft²kg/m²4×8 ft (lb)4×8 ft (kg)
3/16 in 4.767.6637.39245111
1/4 in 6.3510.2149.85327148
5/16 in 7.9412.7662.31408185
3/8 in 9.5215.3174.77490222
1/2 in 12.7020.4299.70653296
5/8 in 15.8825.52124.62817370
3/4 in 19.0530.63149.54980445
1 in 25.4040.84199.391,307593

Theoretical weights. ASTM A6 allows plate up to 0.01 in under the ordered thickness; over-tolerance varies with width and thickness.

Engineering and fabrication notes

1/4 in (6.35 mm) is among the thinnest common sizes sold as plate rather than sheet: ASTM A6 covers carbon steel plate from 0.230 in thick for widths over 8 in, so 1/4 in sits just above that line. It weighs 10.21 lb/ft², so a full 4×8 ft plate is about 327 lb. It is a staple for base plates, brackets, gussets, trailer decks, machine guards and laser-cut parts. ASTM A6, the general requirements specification for structural plate, allows plate to be rolled up to 0.01 in under the ordered thickness, and the over-tolerance depends on width and thickness, so delivered weight is rarely exactly theoretical. Treat 10.21 lb/ft² as the planning figure and confirm invoicing terms with the supplier.

Frequently asked questions

How much does 1/4 inch steel plate weigh per square foot?

1/4 in carbon steel plate weighs 10.21 lb/ft² (49.85 kg/m²): 0.2500 in × 144 × 0.2836 lb/in³. A quick check is thickness × 40.84 lb/ft² per inch.

How much does a 4×8 sheet of 1/4 inch steel plate weigh?

About 327 lb (148 kg): 10.21 lb/ft² × 32 ft². The 1250×2500 mm size weighs 156 kg.

What would 1/4 inch plate weigh in stainless steel or aluminum?

With 8,000 kg/m³ for stainless it is 10.40 lb/ft²; with 2,700 kg/m³ for aluminum it is 3.51 lb/ft². See the comparison table above for all five metals.

How far can 1/4 inch plate weigh from the calculated 10.21 lb/ft²?

Not exactly the same. ASTM A6 allows plate to be up to 0.01 in under the ordered thickness, which is 4.0% of 1/4 in, or about 13 lb on a 4×8 sheet. Over-tolerances depend on width and thickness. Confirm whether the supplier invoices on theoretical or scale weight.