Skip to content
StockGauge Metal gauge · plate · bar · pipe

3/8 Inch Steel Plate Weight

3/8 inch (9.52 mm) carbon steel plate weighs 15.31 lb per square foot (74.77 kg/m²). A 4×8 ft plate weighs 490 lb (222 kg) and a 1250×2500 mm plate weighs 234 kg, using 7,850 kg/m³ (0.2836 lb/in³).

Thickness
0.3750 in · 9.52 mm
Weight per ft²
15.31 lb
Weight per m²
74.77 kg
4×8 ft plate
490 lb · 222 kg
1250×2500 mm plate
234 kg · 515 lb
Density used
7,850 kg/m³ · 0.2836 lb/in³

Sheet metal gauge & plate weight calculator

Mode

Manufacturers' Standard Gauge (MSG). Weight-defined: nominal lb/ft² ÷ 41.82 lb/ft² per inch. Density 7,850 kg/m³ = 0.2836 lb/in³. Common handbook value for carbon and low-alloy steel (ASTM A36 design density).

Length, width and thickness use the same unit. Fractions such as 1/4 are accepted.

One piece

490.1 lb

222.3 kg

Total × 1

490.1 lb

222.3 kg

Area per piece

32.000 ft²

2.9729 m²

Thickness

0.3750 in

9.52 mm

Piece (L × W × T)
96 × 48 × 0.375 in
Thickness
0.3750 in · 9.525 mm
Nearest gauge
Thicker than 7 ga (0.1793 in): plate, ordered by thickness
Density
7,850 kg/m³ (0.2836 lb/in³)
Area per piece
32.000 ft² · 2.9729 m²
One piece
490.1 lb · 222.3 kg
Total for 1 piece
490.1 lb · 222.3 kg

Worked calculation

  1. Convert the thickness. 3/8 in = 0.3750 in = 9.52 mm.
  2. State the density. Carbon steel: 7,850 kg/m³ = 0.2836 lb/in³ (ASTM A36 design density).
  3. Weight per square foot. 0.3750 in × 144 in²/ft² × 0.2836 lb/in³ ≈ 15.31 lb/ft². Shortcut: thickness × 40.84 lb/ft² per inch.
  4. Weight per square metre. 9.52 mm × 7.85 kg/m²/mm ≈ 74.77 kg/m².
  5. Weight of a 4×8 ft plate. 15.31 lb/ft² × 32 ft² ≈ 490 lb (222 kg).
  6. Weight of any cut piece. lb = length (in) × width (in) × 0.3750 × 0.2836. A 24 × 24 in blank: 24 × 24 × 0.3750 × 0.2836 ≈ 61.3 lb.

Reference tables

3/8 in plate or sheet in five metals
MetalDensity (kg/m³)lb/ft²kg/m²4×8 ft (lb)1250×2500 mm (kg)
Carbon steel 7,85015.3174.77490234
Stainless steel 8,00015.6176.20499238
Aluminum 2,7005.2725.7216980.4
Brass C360 8,50016.5880.96531253
Copper C110 8,94017.4485.15558266

Theoretical weights from nominal thickness and handbook density. Mill and supplier tolerances apply.

3/8 inch carbon steel plate: weight by piece size
Piece sizeft²lbkg
12 × 12 in (1 ft²) 1.015.36.9
24 × 24 in 4.061.327.8
24 × 48 in 8.012355.6
48 × 96 in (4×8 ft) 32.0490222
48 × 120 in (4×10 ft) 40.0613278
60 × 120 in (5×10 ft) 50.0766347
1250 × 2500 mm 33.6515234
Carbon steel plate weight by thickness
Thicknessmmlb/ft²kg/m²4×8 ft (lb)4×8 ft (kg)
3/16 in 4.767.6637.39245111
1/4 in 6.3510.2149.85327148
5/16 in 7.9412.7662.31408185
3/8 in 9.5215.3174.77490222
1/2 in 12.7020.4299.70653296
5/8 in 15.8825.52124.62817370
3/4 in 19.0530.63149.54980445
1 in 25.4040.84199.391,307593

Theoretical weights. ASTM A6 allows plate up to 0.01 in under the ordered thickness; over-tolerance varies with width and thickness.

Engineering and fabrication notes

3/8 in plate (9.52 mm) weighs 15.31 lb/ft², which puts a full 4×8 ft sheet at about 490 lb: heavy enough that handling is planned with a forklift, crane or magnetic lifter rather than by hand. Cut pieces are easier to budget by size, for example a 24 × 24 in blank weighs about 61.3 lb and a 24 × 48 in blank about 123 lb. It is a common thickness for equipment frames, structural gussets and bases, and plasma, laser and waterjet cutting all handle it routinely. Weld preparation, usually a bevelled edge for full penetration, adds a processing step that thinner plate often avoids.

Frequently asked questions

How much does 3/8 inch steel plate weigh per square foot?

3/8 in carbon steel plate weighs 15.31 lb/ft² (74.77 kg/m²): 0.3750 in × 144 × 0.2836 lb/in³. A quick check is thickness × 40.84 lb/ft² per inch.

How much does a 4×8 sheet of 3/8 inch steel plate weigh?

About 490 lb (222 kg): 15.31 lb/ft² × 32 ft². The 1250×2500 mm size weighs 234 kg.

What would 3/8 inch plate weigh in stainless steel or aluminum?

With 8,000 kg/m³ for stainless it is 15.61 lb/ft²; with 2,700 kg/m³ for aluminum it is 5.27 lb/ft². See the comparison table above for all five metals.

How far can 3/8 inch plate weigh from the calculated 15.31 lb/ft²?

Not exactly the same. ASTM A6 allows plate to be up to 0.01 in under the ordered thickness, which is 2.7% of 3/8 in, or about 13 lb on a 4×8 sheet. Over-tolerances depend on width and thickness. Confirm whether the supplier invoices on theoretical or scale weight.