Skip to content
StockGauge Metal gauge · plate · bar · pipe

1/2 Inch Round Aluminum Bar Weight per Foot and per Bar

1/2 inch round 6061 aluminum bar (diameter 0.5000 in) has a cross-section of 0.1963 in² and weighs 0.230 lb per foot (0.342 kg/m) at 2,700 kg/m³ (0.0975 lb/in³). A 12 ft bar weighs 2.8 lb and a 20 ft bar 4.6 lb.

Size
diameter 0.5000 in
Cross-section
0.1963 in² · 126.7 mm²
Weight per foot
0.230 lb
Weight per metre
0.342 kg
12 ft / 20 ft bar
2.8 lb / 4.6 lb
Density used
2,700 kg/m³ · 0.0975 lb/in³

Metal bar stock weight calculator

Shape

Cross-section A = π/4 × d²

Per foot

0.230 lb

0.342 kg/m

One bar

2.758 lb

1.251 kg

Total × 1

2.758 lb

1.251 kg

Cross-section

0.1963 in²

126.7 mm²

Shape and size
Round bar, diameter 0.5 in
Material and density
6061 Aluminum, 2,700 kg/m³ (0.0975 lb/in³)
Cross-section area
0.1963 in² · 126.7 mm²
Weight per foot
0.230 lb/ft
Weight per metre
0.342 kg/m
Length per bar
12 ft · 3.658 m
One bar
2.758 lb · 1.251 kg
Total for 1 bar
2.758 lb · 1.251 kg
  • Theoretical weight from nominal size and handbook density. Mill tolerances and cut length change delivered weight; see the tolerance guide.

Worked calculation

  1. Cross-section area. Round bar, diameter 0.5000 in. A = π/4 × d² → π/4 × 0.5000² = 0.1963 in² (126.7 mm²).
  2. State the density. 6061 Aluminum: 2,700 kg/m³ = 0.0975 lb/in³.
  3. Weight per foot. 0.1963 in² × 12 in/ft × 0.0975 lb/in³ ≈ 0.230 lb/ft.
  4. Weight per metre. 126.7 mm² × 2,700 kg/m³ ÷ 1,000,000 ≈ 0.342 kg/m.
  5. Weight of a stock length. 12 ft: 0.230 × 12 ≈ 2.8 lb. 20 ft: 0.230 × 20 ≈ 4.6 lb.

Reference tables

1/2 inch round bar in six metals
MetalDensity (kg/m³)lb/ftkg/m12 ft bar (lb)20 ft bar (lb)
Carbon Steel 7,8500.6680.9948.013.4
304 Stainless Steel 8,0000.6811.0138.213.6
316 Stainless Steel 8,0000.6811.0138.213.6
6061 Aluminum 2,7000.2300.3422.84.6
Brass C360 (free-cutting) 8,5000.7241.0778.714.5
Copper C110 8,9400.7611.1329.115.2

304 and 316 use the same rounded 8,000 kg/m³ density. Real bar differs by a fraction of a percent between alloys and suppliers.

Round bar in neighbouring sizes (6061 aluminum)
DiameterArea (in²)lb/ftkg/m20 ft bar (lb)
1/4 in 0.04910.0570.0861.1
3/8 in 0.11040.1290.1922.6
1/2 in 0.19630.2300.3424.6
5/8 in 0.30680.3590.5347.2
3/4 in 0.44180.5170.77010.3
1/2 inch bar in three shapes (6061 aluminum)
ShapeArea (in²)lb/ftkg/m
Round bar (diameter 0.5000 in) 0.19630.2300.342
Square bar (side 0.5000 in) 0.25000.2930.435
Hex bar (across flats 0.5000 in) 0.21650.2530.377

Engineering and fabrication notes

1/2 in 6061 aluminum round bar weighs 0.230 lb per foot (0.342 kg/m), about 34% of the same size in carbon steel (0.668 lb/ft), because the density ratio is 2,700 : 7,850. A 12 ft stick is only 2.8 lb. 6061 is a common machining alloy, usually bought in a T6-type temper; the density is effectively the same across tempers, so weight does not change with temper. It is used for prototypes, fixtures, standoffs and light structural parts. Size tolerances for drawn aluminum bar differ from steel, so measure critical stock before machining.

Frequently asked questions

How much does 1/2 inch round 6061 aluminum bar weigh per foot?

0.230 lb per foot (0.342 kg per metre), from an area of 0.1963 in² and a density of 0.0975 lb/in³ (2,700 kg/m³).

How much does a 20 ft length of 1/2 inch round 6061 aluminum bar weigh?

About 4.6 lb (2.1 kg). A 12 ft length weighs 2.8 lb (1.3 kg). Actual bar varies with size tolerance.

What formula gives the weight of 1/2 inch round 6061 aluminum bar?

A = π/4 × d², which is 0.1963 in² for this size. Then weight per foot = area (in²) × 12 × density (lb/in³) = 0.1963 × 12 × 0.0975 ≈ 0.230 lb. In metric, weight per metre = area (mm²) × density (kg/m³) ÷ 1,000,000.

What would 1/2 inch round bar weigh in other metals?

Per foot: Carbon steel 0.668 lb, 304 stainless 0.681 lb, 316 stainless 0.681 lb, 6061 aluminum 0.230 lb, Brass C360 0.724 lb, Copper C110 0.761 lb.