1 Inch Square Steel Bar Weight per Foot and per Bar
1 inch square steel bar (side 1.0000 in) has a cross-section of 1.0000 in² and weighs 3.403 lb per foot (5.065 kg/m) at 7,850 kg/m³ (0.2836 lb/in³). A 12 ft bar weighs 40.8 lb and a 20 ft bar 68.1 lb.
- Size
- side 1.0000 in
- Cross-section
- 1.0000 in² · 645.2 mm²
- Weight per foot
- 3.403 lb
- Weight per metre
- 5.065 kg
- 12 ft / 20 ft bar
- 40.8 lb / 68.1 lb
- Density used
- 7,850 kg/m³ · 0.2836 lb/in³
Metal bar stock weight calculator
Per foot
3.403 lb
5.065 kg/m
One bar
40.84 lb
18.52 kg
Total × 1
40.84 lb
18.52 kg
Cross-section
1.0000 in²
645.2 mm²
- Shape and size
- Square bar, side width 1 in
- Material and density
- Carbon Steel, 7,850 kg/m³ (0.2836 lb/in³)
- Cross-section area
- 1.0000 in² · 645.2 mm²
- Weight per foot
- 3.403 lb/ft
- Weight per metre
- 5.065 kg/m
- Length per bar
- 12 ft · 3.658 m
- One bar
- 40.84 lb · 18.52 kg
- Total for 1 bar
- 40.84 lb · 18.52 kg
- Theoretical weight from nominal size and handbook density. Mill tolerances and cut length change delivered weight; see the tolerance guide.
Worked calculation
- Cross-section area. Square bar, side 1.0000 in. A = s² → 1.0000² = 1.0000 in² (645.2 mm²).
- State the density. Carbon Steel: 7,850 kg/m³ = 0.2836 lb/in³.
- Weight per foot. 1.0000 in² × 12 in/ft × 0.2836 lb/in³ ≈ 3.403 lb/ft.
- Weight per metre. 645.2 mm² × 7,850 kg/m³ ÷ 1,000,000 ≈ 5.065 kg/m.
- Weight of a stock length. 12 ft: 3.403 × 12 ≈ 40.8 lb. 20 ft: 3.403 × 20 ≈ 68.1 lb.
Reference tables
| Metal | Density (kg/m³) | lb/ft | kg/m | 12 ft bar (lb) | 20 ft bar (lb) |
|---|---|---|---|---|---|
| Carbon Steel | 7,850 | 3.403 | 5.065 | 40.8 | 68.1 |
| 304 Stainless Steel | 8,000 | 3.468 | 5.161 | 41.6 | 69.4 |
| 316 Stainless Steel | 8,000 | 3.468 | 5.161 | 41.6 | 69.4 |
| 6061 Aluminum | 2,700 | 1.171 | 1.742 | 14.0 | 23.4 |
| Brass C360 (free-cutting) | 8,500 | 3.685 | 5.484 | 44.2 | 73.7 |
| Copper C110 | 8,940 | 3.876 | 5.768 | 46.5 | 77.5 |
304 and 316 use the same rounded 8,000 kg/m³ density. Real bar differs by a fraction of a percent between alloys and suppliers.
| Side | Area (in²) | lb/ft | kg/m | 20 ft bar (lb) |
|---|---|---|---|---|
| 3/4 in | 0.5625 | 1.914 | 2.849 | 38.3 |
| 7/8 in | 0.7656 | 2.606 | 3.878 | 52.1 |
| 1 in | 1.0000 | 3.403 | 5.065 | 68.1 |
| 1 1/4 in | 1.5625 | 5.317 | 7.913 | 106.3 |
| 1 1/2 in | 2.2500 | 7.657 | 11.395 | 153.1 |
| Shape | Area (in²) | lb/ft | kg/m |
|---|---|---|---|
| Round bar (diameter 1.0000 in) | 0.7854 | 2.673 | 3.978 |
| Square bar (side 1.0000 in) | 1.0000 | 3.403 | 5.065 |
| Hex bar (across flats 1.0000 in) | 0.8660 | 2.947 | 4.386 |
Engineering and fabrication notes
1 in square steel bar weighs 3.403 lb/ft (5.065 kg/m), about 27% more than 1 in round bar (2.673 lb/ft), because a square of side s has area s² against π/4 × s² for the circle that fits inside it, a ratio of 4/π. A 20 ft stick is about 68.1 lb. It is used for frames, gates, railing posts, machined blocks and hardware stock. When a drawing says "1 inch bar" without a shape, the weight difference is large enough to matter on a bulk order, so always state round, square, flat or hex.
Adjacent sizes and comparisons
- 1 inch round steel bar Another bar shape or metal
- 2 inch round steel bar Another bar shape or metal
- 1/4 × 2 inch flat steel bar Another bar shape or metal
- 3/4 inch hex steel bar Another bar shape or metal
- Bar stock weight calculator Round, square, flat and hex
- Calculating metal weight by hand Reference guide
- All stock pages Plate, bar and pipe
Frequently asked questions
How much does 1 inch square steel bar weigh per foot?
3.403 lb per foot (5.065 kg per metre), from an area of 1.0000 in² and a density of 0.2836 lb/in³ (7,850 kg/m³).
How much does a 20 ft length of 1 inch square steel bar weigh?
About 68.1 lb (30.9 kg). A 12 ft length weighs 40.8 lb (18.5 kg). Actual bar varies with size tolerance.
What formula gives the weight of 1 inch square steel bar?
A = s², which is 1.0000 in² for this size. Then weight per foot = area (in²) × 12 × density (lb/in³) = 1.0000 × 12 × 0.2836 ≈ 3.403 lb. In metric, weight per metre = area (mm²) × density (kg/m³) ÷ 1,000,000.
What would 1 inch square bar weigh in other metals?
Per foot: Carbon steel 3.403 lb, 304 stainless 3.468 lb, 316 stainless 3.468 lb, 6061 aluminum 1.171 lb, Brass C360 3.685 lb, Copper C110 3.876 lb.