Skip to content
StockGauge Metal gauge · plate · bar · pipe

14 Gauge Stainless Steel Thickness and Weight

A 14 gauge stainless steel sheet is 0.0781 in (1.984 mm) thick. At 8,000 kg/m³ (0.2890 lb/in³) it weighs 3.250 lb/ft² (15.87 kg/m²), so a 4×8 ft sheet weighs 104 lb (47.2 kg) and a 1250×2500 mm sheet weighs 49.6 kg (109 lb).

Thickness
0.0781 in · 1.984 mm
Weight per ft²
3.250 lb
Weight per m²
15.87 kg
4×8 ft sheet
104 lb · 47.2 kg
1250×2500 mm sheet
49.6 kg · 109 lb
Density used
8,000 kg/m³ · 0.2890 lb/in³

Sheet metal gauge & plate weight calculator

Mode

Stainless Steel Gauge (U.S. Standard progression). Same nominal weights as MSG, divided by 40 lb/ft² per inch. Density 8,000 kg/m³ = 0.2890 lb/in³. Rounded handbook value for austenitic 304 and 316 (published figures cluster around 8,000 kg/m³).

Thickness

0.0781 in

1.98 mm

Per ft²

3.250 lb

15.87 kg/m²

4 × 8 ft sheet

104.0 lb

47.18 kg

1250 × 2500 mm

49.59 kg

109.3 lb

Gauge standard
Stainless Steel Gauge (U.S. Standard progression)
Thickness
0.0781 in · 1.984 mm
Nearest gauge
14 ga on the Stainless chart
Density
8,000 kg/m³ (0.2890 lb/in³)
Weight per ft²
3.250 lb
Weight per m²
15.87 kg
4 × 8 ft (48 × 96 in) sheet (32 ft²)
104.0 lb · 47.18 kg
1250 × 2500 mm sheet (3.125 m²)
109.3 lb · 49.59 kg

Worked calculation

  1. Look up the thickness. Stainless Steel Gauge (U.S. Standard progression), 14 ga = 0.0781 in. In millimetres: 0.0781 × 25.4 = 1.984 mm.
  2. State the density. Stainless Steel 304 / 316: 8,000 kg/m³ = 0.2890 lb/in³ (1 lb/in³ = 27,679.9 kg/m³).
  3. Weight per square foot. 0.0781 in × 144 in²/ft² × 0.2890 lb/in³ ≈ 3.250 lb/ft².
  4. Weight per square metre. 1.984 mm × 8.00 kg/m²/mm (density ÷ 1,000) ≈ 15.87 kg/m².
  5. Weight of a 4×8 ft sheet. 3.250 lb/ft² × 32 ft² ≈ 104 lb (47.2 kg). For a 1250×2500 mm sheet: 15.87 kg/m² × 3.125 m² ≈ 49.6 kg.
  6. Compare with the published chart weight. MSG defines 14 ga as 3.125 lb/ft² nominal (0.0781 in × 41.82 lb/ft² per inch). The density-based 3.250 lb/ft² is -3.9% lower because 7,850 kg/m³ equals 40.84 lb/ft² per inch, not 41.82.

Reference tables

14 gauge in each chart (density-based weights)
ChartThickness (in)Thickness (mm)lb/ft²kg/m²4×8 ft sheet (lb)
Manufacturers' Standard Gauge (MSG) 0.07471.903.05114.8997.6
Stainless Steel Gauge (U.S. Standard progression) 0.07811.983.25015.87104
Brown & Sharpe / American Wire Gauge (AWG) 0.06411.630.9004.4028.8
Galvanized Sheet Gauge 0.07851.993.20615.65103

The same gauge number gives a different thickness in every chart.

Stainless gauges around 14 ga
GaugeThickness (in)Thickness (mm)lb/ft²kg/m²4×8 ft sheet (lb)
12 ga 0.10942.784.55322.23146
13 ga 0.09382.383.90419.06125
14 ga 0.07811.983.25015.87104
15 ga 0.07031.792.92614.2893.6
16 ga 0.06251.592.60112.7083.2

Engineering and fabrication notes

14 gauge stainless steel is 0.0781 in (1.98 mm), exactly 5/64 in. It is a common thickness for commercial kitchen work tables, sink bowls, food-service equipment tops and lab or medical furniture that must resist corrosion and take regular washing. At 8,000 kg/m³ it weighs 3.250 lb/ft², about 6.5% more per square foot than carbon steel of the same gauge number, so a quote that swaps stainless for steel at "14 gauge" changes the part weight and the freight as well as the price. A 4×8 sheet is about 104 lb.

Frequently asked questions

What is the thickness of 14 gauge stainless steel?

14 Gauge Stainless Steel is 0.0781 in or 1.98 mm on the Stainless Steel Gauge (U.S. Standard progression) chart. Same nominal weights as MSG, divided by 40 lb/ft² per inch.

How much does a 4×8 sheet of 14 gauge stainless steel weigh?

A 4×8 ft (48 × 96 in) sheet of 14 gauge stainless steel weighs about 104 lb (47.2 kg) using 8,000 kg/m³. That is 3.250 lb/ft² × 32 ft². Actual mill weight varies with thickness tolerance.

Is 14 gauge stainless steel the same thickness as 14 gauge in other metals?

No. At 14 gauge the charts give 0.0747 in for carbon steel, 0.0781 in for stainless steel, 0.0641 in for aluminum and 0.0785 in for galvanized steel.

Why is 14 gauge stainless steel 0.0781 in thick?

Stainless sheet follows the older U.S. Standard Gauge progression, which divides the nominal weight by 40 lb/ft² per inch: 3.125 ÷ 40 = 0.0781 in. Carbon steel divides the same nominal weight by 41.82 and gets 0.0747 in. ASTM A480 discourages gauge numbers, so order stainless by decimal thickness.