Skip to content
StockGauge Metal gauge · plate · bar · pipe

11 Gauge Steel Thickness and Weight

A 11 gauge carbon steel (MSG) sheet is 0.1196 in (3.038 mm) thick. At 7,850 kg/m³ (0.2836 lb/in³) it weighs 4.884 lb/ft² (23.85 kg/m²), so a 4×8 ft sheet weighs 156 lb (70.9 kg) and a 1250×2500 mm sheet weighs 74.5 kg (164 lb).

Thickness
0.1196 in · 3.038 mm
Weight per ft²
4.884 lb
Weight per m²
23.85 kg
4×8 ft sheet
156 lb · 70.9 kg
1250×2500 mm sheet
74.5 kg · 164 lb
Density used
7,850 kg/m³ · 0.2836 lb/in³

Sheet metal gauge & plate weight calculator

Mode

Manufacturers' Standard Gauge (MSG). Weight-defined: nominal lb/ft² ÷ 41.82 lb/ft² per inch. Density 7,850 kg/m³ = 0.2836 lb/in³. Common handbook value for carbon and low-alloy steel (ASTM A36 design density).

Thickness

0.1196 in

3.04 mm

Per ft²

4.884 lb

23.85 kg/m²

4 × 8 ft sheet

156.3 lb

70.89 kg

1250 × 2500 mm

74.52 kg

164.3 lb

Gauge standard
Manufacturers' Standard Gauge (MSG)
Thickness
0.1196 in · 3.038 mm
Nearest gauge
11 ga on the MSG chart
Density
7,850 kg/m³ (0.2836 lb/in³)
Weight per ft²
4.884 lb
Weight per m²
23.85 kg
4 × 8 ft (48 × 96 in) sheet (32 ft²)
156.3 lb · 70.89 kg
1250 × 2500 mm sheet (3.125 m²)
164.3 lb · 74.52 kg
  • Published MSG charts list 5.000 lb/ft² for 11 ga because they use 41.82 lb/ft² per inch. Density-based weight is 4.884 lb/ft² (40.84 lb/ft² per inch).

Worked calculation

  1. Look up the thickness. Manufacturers' Standard Gauge (MSG), 11 ga = 0.1196 in. In millimetres: 0.1196 × 25.4 = 3.038 mm.
  2. State the density. Carbon Steel: 7,850 kg/m³ = 0.2836 lb/in³ (1 lb/in³ = 27,679.9 kg/m³).
  3. Weight per square foot. 0.1196 in × 144 in²/ft² × 0.2836 lb/in³ ≈ 4.884 lb/ft².
  4. Weight per square metre. 3.038 mm × 7.85 kg/m²/mm (density ÷ 1,000) ≈ 23.85 kg/m².
  5. Weight of a 4×8 ft sheet. 4.884 lb/ft² × 32 ft² ≈ 156 lb (70.9 kg). For a 1250×2500 mm sheet: 23.85 kg/m² × 3.125 m² ≈ 74.5 kg.
  6. Compare with the published chart weight. MSG defines 11 ga as 5.000 lb/ft² nominal (0.1196 in × 41.82 lb/ft² per inch). The density-based 4.884 lb/ft² is 2.4% lower because 7,850 kg/m³ equals 40.84 lb/ft² per inch, not 41.82.

Reference tables

11 gauge in each chart (density-based weights)
ChartThickness (in)Thickness (mm)lb/ft²kg/m²4×8 ft sheet (lb)
Manufacturers' Standard Gauge (MSG) 0.11963.044.88423.85156
Stainless Steel Gauge (U.S. Standard progression) 0.12503.185.20225.40166
Brown & Sharpe / American Wire Gauge (AWG) 0.09072.301.2746.2240.8
Galvanized Sheet Gauge 0.12333.135.03524.58161

The same gauge number gives a different thickness in every chart.

MSG gauges around 11 ga
GaugeThickness (in)Thickness (mm)lb/ft²kg/m²4×8 ft sheet (lb)
9 ga 0.14953.806.10529.81195
10 ga 0.13453.425.49326.82176
11 ga 0.11963.044.88423.85156
12 ga 0.10462.664.27220.86137
13 ga 0.08972.283.66317.89117

Engineering and fabrication notes

11 gauge (0.1196 in, 3.04 mm) is the gauge most often confused with 1/8 in. They are not the same: 1/8 in is 0.1250 in, so 11 gauge steel is about 4% thinner and weighs 4.884 lb/ft² against 5.10 lb/ft² for true 1/8 in plate. Stainless 11 gauge happens to be exactly 0.1250 in, which is one reason the number gets quoted loosely. If a drawing just says "11 gauge", ask whether it means carbon steel, stainless or a plain 1/8 in plate, then price on the thickness you are really buying.

Frequently asked questions

What is the thickness of 11 gauge carbon steel (MSG)?

11 Gauge Steel is 0.1196 in or 3.04 mm on the Manufacturers' Standard Gauge (MSG) chart. Weight-defined: nominal lb/ft² ÷ 41.82 lb/ft² per inch.

How much does a 4×8 sheet of 11 gauge carbon steel (MSG) weigh?

A 4×8 ft (48 × 96 in) sheet of 11 gauge carbon steel (MSG) weighs about 156 lb (70.9 kg) using 7,850 kg/m³. That is 4.884 lb/ft² × 32 ft². Actual mill weight varies with thickness tolerance.

Is 11 gauge steel the same thickness as 11 gauge in other metals?

No. At 11 gauge the charts give 0.1196 in for carbon steel, 0.1250 in for stainless steel, 0.0907 in for aluminum and 0.1233 in for galvanized steel.

Why does a chart list 11 gauge steel as 5.000 lb/ft²?

Manufacturers' Standard Gauge was defined by weight: 11 ga is a nominal 5.000 lb/ft², and the thickness 0.1196 in is that weight divided by 41.82 lb/ft² per inch. True steel density gives 4.884 lb/ft², about 2.4% less.